A new switch for entering the geometry of a car has been implemented in the car dialog (see arrow): : A geometrie created via the switch: "draw" Example of a geometry created from the database: "Panorama" Predefined forms in the database are currently:
In the calculation of the guide rails in the case of earthquakes, the mass of the empty car was implemented without travaling cables and compensating ropes / chains. According to EN 81-77: 2018
In the guide rail dialog, is the choice of buffer type now implemented by the click in the field impact factor k1. If buffers are selected in the actual order, the type will be taken from the buffer module. If no buffer has been selected in the actual order, the buffer type can be free selected. The max. impact factor k1 is determined by the safety gear type and buffer type. According to table 14 from EN81-20, point 18.104.22.168
We had to integrate the latest version of the programming language PHP 7.x. We've tested all the features, if there are some problems, please contact info(at)liwetec.com. Many Thanks. Yours sincerely the EP team
Rails calculation - enter beams forces Car guide rail calculation - load type catch, drive, charged If you have already entered and calculated the beams in the bemas calculation, the beams symbol next to the input field also appears. Now you can click and accept all beams forces that also act as additional load on the rail. The additional load adapts automatically. A detailed description can be found in the help file “Guide rails car” – tab “Load type”. Counterweight guide rail calculation - load type catch, drive/jumping The possible input of the carrier forces at the counterweight rails is equivalent to above. A detailed description can be found in the help file “Guide rails counterweight” – tab “Load type”.